Can Removing a Tree Cause Foundation Problems?

Img source:

Sometimes it is very difficult to predict the consequences of removing tree, because it is influenced by several factors. Fortunately, there are several options for safe tree removal. It is very important to consider the type of tree, because some trees are invasive species that can take over the garden over time. Unfortunately, it happens that the trees overflow your roots, dig up the roots in the foundation or limit the access of light. That’s why people decide to cut.

Whatever the reason, it’s best to consider all the options before you. Before that, you need to be sufficiently informed about the best way for your specific situation. While a beautiful oak tree looks great in front of your home, something bad may be going on underground. To prevent this, it is best to consult with experts and research something more about removing trees.

Img source:

What should I do if I suspect a problem?

Check your home regularly so that small problems do not suddenly become your worst nightmare. This can also happen when it comes to trees. For example, some of the common signs are unusual cracks, vertical cracks in the wall that extend through the foundation or spread at the bottom. If you notice that trees have something to do with this, know that it can permanently damage the structure of your home. That is why it is best to call an expert to consult with him. Contact a knowledgeable foundation expert. He will draw your attention to all the omissions and potential problems. No matter how small the damage may seem to you, much greater hidden damage can be hidden under the surface.

Can removing trees cause foundation problems?

In most cases, removing the tree will not damage the structure of your yard. There are rare cases in which problems have occurred. Rest assured that this procedure will bring you much more benefits than harm. If you decide to remove trees with invasive roots, you will prevent potential damage to the foundation. The consequences of such roots are mainly deposition and tilting of the foundation.

Therefore, it is best to get rid of the problematic tree as soon as possible. There are also situations where the tree is in a very bad position and is close to your home. It happens that its branches or the whole tree falls on the house. Check your yard often to see early signs of problematic trees. That way, you will be able to take all protective measures in time to save your property. If you are still worried about foundation problems when removing trees, find more about tree removal without collateral damage at

Img source:



Before you focus on foundation problems, take care of your own safety. This applies to all those who are trying to get rid of trees on their own. Pay attention to safety when working with a saw and you should work slowly and methodically, gradually increasing the speed. One of the indicators of poor posture is back pain. If you experience this symptom, automatically stop working and change the technique or improve it. Also, pay attention to the appropriate working height so that the tree falls in the desired place. It is recommended to cut down trees in the direction of other fallen trees, stumps, stones and other types of uplifts in the field.

We must not forget the appropriate attitude. Stand in a safe place, on the left side of the trunk. The feet should be separated at an angle of 45 degrees to the trunk. Keep the saw close to your body and keep it safe in both directions. It is important that you always have enough reach so that you do not take risks. To avoid accidents, it is important not to lift the chain saw off the trunk more than necessary. Hold the saw by both handles when walking short distances, never just the rear handle. Avoid cutting with the tip of the guide.

Stable cutting equipment

If you plan to do this work yourself, you need to have the appropriate equipment and tools with you. This includes wearing a helmet, goggles, ear protection, work gloves, a chainsaw and dowels. We do not recommend cutting tree without this equipment, because every part of it is necessary. Don’t forget to check local rules and laws before you start planning. For even greater security, call a friend to help you.

Img source:

Planning tree felling

Once you have purchased the necessary equipment, proceed to clean the area surrounding the tree. This will provide you with a way to escape if something goes wrong at the moment of shooting down. You will also better plan the whole process and implement the plan safely. Make an appropriate notch for this purpose, as this will allow the tree to fall properly where you intended. So, make a notch in the place where the tree is the heaviest. You don’t have to cut too low, because you can always shorten the stump. Always use safety pins. After cutting the tree enough to set the wedges, stop cutting for a moment, load the wedges and continue working. This will prevent the tree from crushing the saw.

Before the tree falls, make a final cut. As soon as the tree starts to move, stop cutting and go to a safe place until the tree falls. Of course, this will be best done by someone who is an expert. That is why professional help is always welcome, and she will be able to give you the best advice. In case you are not confident enough in your knowledge and abilities, it is always a better option to hire experts who will do this for you. They will know everything about growing trees, cutting and many other things. This means that they will do the job much faster than you and will not do any damage.


Invasive tree roots are very dangerous to your home and yard. For example, if the tree is too close to your home, it is best to get rid of it immediately. Failure to do so may result in flooding or erosion of the foundation. You can also prevent setting and leaning caused by invasive tree roots.